EASYPHALT® BASIC 0/5

Cold asphalt

Grain: 0/5
Installation depth: 2-4 cm

EASYPHALT® PRO 0/4

Cold asphalt

Grain: 0/4
Installation depth: 2-4 cm

PRODUCT INFORMATION

EASYPHALT® PRO 0/8

Cold asphalt

Grain: 0/8
Installation depth: 3-5 cm

PRODUCT INFORMATION

EASYPHALT® AQUA 0/8

Cold asphalt

Grain: 0/8
Installation depth: 3-5 cm

PRODUCT INFORMATION

EASYPHALT® PRIME

BITUMINOUS PRIMER FOR COLD ASPHALT


PRODUCT INFORMATION
GRAIN
0/5
RECOMMENDED INSTALLATION
2-4 cm
(install more than 4 cm in multiple layers)
CONTENT
25 KG

The cold mixture for low-load traffic surfaces.

ready to use | stable | solvent-free | ready for traffic immediately

 

Perfect for cost-effective and temporary repairs of traffic surfaces.

EASYPHALT® BASIC is ideal for temporary asphalt repairs on low-traffic roads, secondary roads and sidewalks.

INSTALLATION

EASYPHALT® BASIC, EASYPHALT® PRO and EASYPHALT® AQUA can be installed year-round at temperatures between -20°C and +45°C. Before installation, please store at room temperature.

CONSUMPTION & PACKAGING

EASYPHALT® BASIC, EASYPHALT® PRO and EASYPHALT® AQUA are available in buckets of 25 kg each (equivalent to 1 m² at an installation depth of 1 cm). The shelf life is 12 months in the unopened bucket. The shelf life of vacuum-packed goods increases to 18 months.

Safety data sheets
(222.0 KiB)
Technical data sheet
(78.4 KiB)

EASYPHALT® PRODUCT VIDEO


EASY APPLICATION IN 4 STEPS

1st Step:
Sweep off

Before installation remove any dirt from the surface.

2nd Step:
Pre-spray

RECOMMENDATION: For maximum durability, we advise that you treat the installation surface with a bituminous primer like EASYPHALT® PRIME.

Recommended step – not mandatory.

3rd Step:
Spread

Spread the required amount of EASYPHALT® slightly protruding the height of the original surface.

4th Step:
Moisten and compress

EASYPHALT® PRO and EASYPHALT® AQUA soak with water (about 5 litres of water per 25 kg bucket). Compress all EASYPHALT® with a roller, vibratory plate or hand tamper. The surface can be approved for traffic immediately after installation.

Moisten only if using EASYPHALT® PRO and EASYPHALT® AQUA